Is there anything a homeowner needs to do to maintain electric heat?
As heating systems go, electric air handlers are the least complex. It is still very important to keep them maintained. With the high consumption of electricity, they are prone to electrical shorts and burnt wiring that can lead to other, more serious problems. Fans accumulate dirt over time, and motors typically require lubrication. Unlike gas heat, an electric air handler can have many problems internally and still produce heat.
When a homeowner calls for no heat on an electric furnace, it is typically from a more catastrophic failure after multiple other failures have already occurred. For example; 1 of 4 electric heat strips can burn out, a sequencer (control device) can fail for one of the remaining 3 elements, and the wiring can overheat and burn off on a 3rd element.
With mild weather, the system will continue to operate in a very unsafe manner until either the blower motor fails, or the final element fails to function. Other than a longer run cycle, a homeowner may be unaware there are significant problems with their system. Regular maintenance can help avoid major problems and help keep the equipment running at the lowest cost possible. Get furnace maintenance near you.
What maintenance should a homeowner do to maintain their HVAC equipment?
Between annual or semi-annual maintenances, homeowners can contribute significantly to the efficiency, comfort, and extended life of their heating and cooling equipment. Airflow is the most important component to the efficiency and longevity of the comfort system. Maintaining good airflow requires a clean filter, unrestricted ductwork, and open vents in the home.
Most duct systems are designed for the output of the furnace. Restricting the airflow with dirty filters, closed vents, or crushed ductwork can cause the system to overheat regularly. Aside from a significant loss of efficiency, this puts tremendous strain on the heat exchanger and compressor, usually resulting in a premature, catastrophic failure. That’s why you should get HVAC service near you.
Keeping the outdoor unit (AC or Heat Pump) clear of plants and soil buildup will maintain high efficiency and reduce the chance of failure due to corrosion. Rinsing the coil on the outdoor unit is also good practice from time to time. This will ensure the hot or cool air is transferred well and the unit is able to produce the maximum amount of heating or cooling for which it is rated.
How do I know it is time to replace my HVAC equipment?
As a rule of thumb, heating and cooling equipment have a typical useful life of between 12-15 years. While many factors can extend, or reduce the functional lifespan, catastrophic failure may not be the only reason you’ll want to consider an upgrade. Get in touch with a contractor for furnace service near you.
It is not always cost-effective to continue to operate an older unit beyond this rule. Federal, state, and local efficiency codes require higher and higher efficiencies of heating and cooling equipment. Over a 15-year life, the efficiency gains of new systems will begin to exceed the operating costs and maintenance and repair of your older equipment. As we say in the industry, “you may be paying for a new system, you’re just not getting it.”
Only you can decide when that time is right for your system upgrade to be made, but with some helpful advice from an experienced and honest service provider, you can make an informed decision and put the investment into the replacement at the right time. Your service provider can typically provide you with an analysis of your return on investment.
There are also local and federal rebates that can help make the system more affordable. If financing is a consideration for you, some upgrades can offset some or all the monthly payments in energy savings alone. You should also get a water heater service in Marysville for better performance.
View Comments (6)
I know someone that lives in a very old house and I thank you for bringing up the topic. Their house needs a lot of repair and mostly the HVAC equipment where heating is mostly used in the winter. What are alternative ways they can replace their HVAC equipment with the struggle they are making can make monthly payments and how would they apply for reduce payment to replace their HVAC equipment due to it is not safe for their family?
Thank you for this article, it was helpful to me as I'm looking to replace my furnace! I might look into seeing if it can just be repaired, instead.
You said to keep air vents open to maintain good airflow, but what is the alternative to closing the vents? My parents always keep the house relatively cold so in the winter I close the vents in my room. Would it be better to keep them open and invest in a space heater?
Are there certain times of year, or certain key year models, where buying a new furnace is most to your advantage?
What should I do if I believe I have an old furnace in my home I'm renting and the owner will not replace it?
Very helpful article for me since my furnace is showing signs of wear and tear!